Overview
Description:This Ultra Miniature low cracking pressure check valve permits free flow in one direction and no flow (checked) in the opposite direction. This valve is specified in many applications because of its very low cracking pressure (typically less than 0.5 psig), its excellent repeatability, and leak-tight operation. Custom variations of barbed and threaded bodies are available. Contact the factory for details.
Working Pressure Range: The unique design of the check valve housing permits the valve to handle a back pressure of up to 250 psig. Barbed configurations are limited to 100 psig, when used with appropriately sized polyurethane tubing. With a clamp installed, the limiting factor generally becomes the burst pressure of the tubing.
Effective Orifice: Approximately 0.035″ to 0.040″
Approximate Weight: 2g in brass and 303 stainless. Weight will vary slightly, depending on configuration.
Note: Check valve elements are designed for regular use. If the valve is not used for an extended period of time, the duckbill element may stick upon first use, resulting in a one-time higher cracking pressure requirement.
Features
- Space saving 5 MM hexagonal body.
- Duckbill checking element allows for cracking pressures around 0.5 psig.
- Check valve elements are typically actuated by reverse pressure and are best suited for applications with over 5 psig of back pressure. If the valve is required to check with minimal back pressure, contact a Beswick applications engineer to discuss available options.