10-32 Thread to 1/8 Inch O.D. Tubing, Straight Compression

CAD Model

Related Products

Single Piece Replacement Ferrules

Symmetrical and Asymmetrical single piece ferrules. Compatible with brass and nickel plated brass MCB-1018 and MCB-1018-1 models. PEEK replacement ferrules for stainless steel MCB-1018-P models.

Configure Here
Two Piece Replacement Ferrules

Front and rear ferrules for metal and plastic tubing. Compatible with stainless steel MCB-1018-1 models.

Configure Here
Replacement Nuts

Compression nuts for both MCB-1018 and MCB-1018-1 models.

Configure Here
Pre-Swage Tools

Tools for pre-swaging ferrules onto tubing prior to assembling fitting. Compatible with both MCB-1018 and MCB-1018-1 models.

Configure Here
Replacement O-Rings

O-Ring seals in all available materials.

Configure Here


Description: Miniature compression fitting with 10-32 external thread, for 1/8″ OD stiff plastic or metal tubing.

Max Pressure Rating: 1,000 psig in brass and 3,000 psig in stainless steel, when used with high pressure metal tubing. When using stiff plastic tubing, the burst pressure of the tube is typically the limiting factor.


  • Beswick compression fittings give you the ability to operate at high pressures and temperatures while maintaining a small envelope.
  • Beswick’s ferrules provide for a leak-tight tubing connection while a captured O-ring ensures a reliable face seal for male threaded fittings.
  • Easy to install without special tools.