10-32 Thread to 1/4 Inch O.D. Tubing, Elbow Compression

CAD Model
Message

Related Products

Single Piece Replacement Ferrules

Single piece ferrules. Compatible with brass MCBL-14 models.

Configure Here
Two Piece Replacement Ferrules

Front and rear ferrules. Compatible with stainless steel MCBL-14-303 and MCBL-14-316 models.

Configure Here
Replacement Nuts

Compression nuts for all available materials.

Configure Here
Pre-Swage Tools

Tools for pre-swaging ferrules onto tubing prior to assembling fitting.

Configure Here
Replacement O-Rings

O-Rings in all available materials for both body and stud seals.

Configure Here

Overview

Description: Miniature compression fitting elbow with 10-32 external thread, for 1/4″ OD stiff plastic or metal tubing. Adjustable position design.

Max Pressure Rating: 1,000 psig in brass and 3,000 psig in stainless steel, when used with high pressure metal tubing. When using stiff plastic tubing, the burst pressure of the tube is typically the limiting factor.

Note: When using our stainless steel ¼” compression fittings in certain applications the use of isopropyl alcohol on the compression threads can help aid installation. If you are using stainless steel or thick-walled tubing or if you have put the compression fitting components through an ultra-pure cleaning process please contact a Beswick Applications Engineer for additional information.

Features

  • Beswick compression fittings give you the ability to operate at high pressures and temperatures while maintaining a small envelope.
  • Beswick’s ferrules provide for a leak-tight tubing connection while a captured O-ring ensures a reliable face seal for male threaded fittings.
  • Easy to install without special tools.