1/4-28 Thread to 1/4 Inch O.D. Tubing, Elbow Compression

CAD Model

Related Products

Two Piece Replacement Ferrules

Front and rear ferrules. Compatible with stainless steel MCBL-1414-303 and MCBL-1414-316 models.

Configure Here
Replacement Nuts

Compression nuts for all available materials.

Configure Here
Pre-Swage Tools

Tools for pre-swaging ferrules onto tubing prior to assembling fitting.

Configure Here
Replacement O-Rings

O-Rings in all available materials for both body and stud seals.

Configure Here


Description: Miniature compression fitting elbow with ¼-28 external thread, for 1/4″ OD stiff plastic or metal tubing.

Max Pressure Rating: 3,000 psig in stainless steel, when used with high pressure metal tubing. When using stiff plastic tubing, the burst pressure of the tube is typically the limiting factor.

Note: When using our stainless steel ¼” compression fittings in certain applications the use of isopropyl alcohol on the compression threads can help aid installation. If you are using stainless steel or thick-walled tubing or if you have put the compression fitting components through an ultra-pure cleaning process please contact a Beswick Applications Engineer for additional information.


  • Beswick compression fittings give you the ability to operate at high pressures and temperatures while maintaining a small envelope.
  • Beswick’s ferrules provide for a leak-tight tubing connection while a captured O-ring ensures a reliable face seal for male threaded fittings.
  • Easy to install without special tools.