1/4-20 Thread to 1/8 Inch O.D. Tubing, Elbow Compression

CAD Model

Related Products

Single Piece Replacement Ferrules

Symmetrical and Asymmetrical single piece ferrules. Compatible with brass MCBL18-1420 and MCBL181-1420 models. PEEK replacement ferrules for MCBL18P-1420 models.

Configure Here
Two Piece Replacement Ferrules

Front and rear ferrules for metal and plastic Tubing. Compatible with stainless steel MCBL181-1420-303 models.

Configure Here
Replacement Nuts

Compression nuts for all available materials.

Configure Here
Pre-Swage Tools

Tools for pre-swaging ferrules onto tubing prior to assembling fitting.

Configure Here
Replacement O-Rings

O-Rings in all available materials for both body and stud seals.

Configure Here


Description: Miniature compression fitting elbow with ¼-20 external thread, for 1/8″ OD stiff plastic or metal tubing. Adjustable position design.

Max Pressure Rating: 1,000 psig in brass and 3,000 psig in stainless steel, when used with high pressure metal tubing. When using stiff plastic tubing, the burst pressure of the tube is typically the limiting factor.

Material: All configurations use a 303 stainless steel stud.  Body, nut, and ferrules are available in brass or 303 stainless steel.


  • Beswick compression fittings give you the ability to operate at high pressures and temperatures while maintaining a small envelope.
  • Beswick’s ferrules provide for a leak-tight tubing connection while a captured O-ring ensures a reliable face seal for male threaded fittings.
  • Easy to install without special tools.