10-32 Thread to 1/8 Inch O.D. Tubing and 10-32 Thread, Tee Compression

CAD Model

Related Products

Single Piece Replacement Ferrules

Symmetrical and Asymmetrical single piece ferrules. Compatible with brass MCBT-18-10 and MCBT-18-1-10 models. PEEK replacement ferrules for MCBT-18-P-10 models.

Configure Here
Two Piece Replacement Ferrules

Front and rear ferrules for metal and plastic Tubing. Compatible with stainless steel MCBT-18-1-10-303 and MCBT-18-1-10-316 models.

Configure Here
Replacement Nuts

Compression nuts for all available materials.

Configure Here
Pre-Swage Tools

Tools for pre-swaging ferrules onto tubing prior to assembling fitting.

Configure Here
Replacement O-Rings

O-Rings in all available materials for both body and stud seals.

Configure Here
Replacement Studs

Studs for all available materials.

Configure Here


Description: Miniature compression fitting tee with one 10-32 external thread, one 10-32 internal thread, and one connection for 1/8″ OD stiff plastic or metal tubing. Adjustable position design.

Max Pressure Rating: 1,000 psig in brass and 3,000 psig in stainless steel, when used with high pressure metal tubing. When using stiff plastic tubing, the burst pressure of the tube is typically the limiting factor. 


  • Beswick compression fittings give you the ability to operate at high pressures and temperatures while maintaining a small envelope.
  • Beswick’s ferrules provide for a leak-tight tubing connection while a captured O-ring ensures a reliable face seal for male threaded fittings.
  • Easy to install without special tools.