10-32 Thread to 1/32 Inch, 1/16 Inch, 1/8 Inch, or 1/4 Inch O.D. Tubing, Redundant Seal Straight Compression

CAD Model
Message

Related Products

Two Piece Replacement Ferrules

Front and rear ferrules compatible with all available tubing sizes and materials.

Configure Here
Replacement Screws

Compression screws for MCB-3T and MCB-6T models.

Configure Here
Replacement Nuts

Compression nuts for MCB-8T and MCB-4T models.

Configure Here
Replacement O-Rings

O-Ring seals in all available materials for 10-32 thread external face seal only. For replacement internal seals please contact an Applications Engineer.

Configure Here

Overview

Description: Miniature compression fitting with 10-32 external thread, for 1/32″ 1/16”, 1/8″, or ¼” OD Teflon® tubing. Internal O-ring seals provide a redundant leak-tight connection for difficult to seal situations such as when using Teflon® tubing.

Max Pressure Rating: 3,000 psig when used with high pressure metal tubing. When using stiff plastic tubing, the burst pressure of the tube is typically the limiting factor.

Note: When using our stainless steel ¼” compression fittings the use of isopropyl alcohol on the compression threads is recommended to aid installation and prevent galling. Should you have any questions please contact a Beswick applications engineer for additional information.

Features

  • Beswick compression fittings give you the ability to operate at high pressures and temperatures while maintaining a small envelope.
  • Beswick’s ferrules provide for a leak-tight tubing connection while a captured O-ring ensures a reliable face seal for male threaded fittings.
  • Easy to install without special tools.