SAV Series Design Transition

Our SAV series stem actuated on/off valves are currently undergoing a transition to a modified body design. We’ll continue to supply two separate versions of the SAV as old assembled stock is depleted and the new body is phased in. Below we outline the dimensional changes to the SAV body as well as which version you can expect to receive with your order. If you would like more details about the transition or if you would like clarification on the information presented below, please reach out to an applications engineer.

SAV current

Current Design

The current SAV body design will continue to be offered until assembled stock has been depleted on several configurations.

Which Configurations Will Be Offered With This Design?

Currently the fastest way to determine if you will receive an SAV with the current design is to configure an SAV on the product page while logged in and then click the “View Configuration” button.

If “Availability” lists “X Units In Stock”, you will receive an SAV with the current body design.

CAD Files: Both .step and .igs format CAD files are available for downloaded after configuring a valid part number while you are logged into the online catalog.

Current Design Drawings

 

New SAV body

New Design

We will be gradually phasing in the new SAV body design.  It will begin to be offered on configurations where old stock has been depleted.

Which Configurations Will Be Offered With This Design?

Currently the fastest way to determine if you will receive an SAV with the current design is to configure an SAV on the product page while logged in and then click the “View Configuration” button.

If “Availability” lists “Usually Ships Within 2-4 Weeks”, you will receive an SAV with the new body design.

CAD Files: CAD files for the new design can be obtained by contacting a Beswick applications engineer.

New Design Drawings