Description: Straight 5/16-24 external threaded barb fitting for 1/4″ ID soft tubing.
Max Pressure Rating: 100 psig, when used with appropriately sized polyurethane tubing. With a clamp installed, the limiting factor generally becomes the burst pressure of the tubing.
- Beswick’s trademark O-ring seal design provides a leak-tight joint.
- Beswick’s proprietary single edged “line contact” barb allows tubing to be pushed onto the fitting easily by hand, while still providing exceptional holding power. It also insures a leak tight connection at the tubing interface.
Note: The 5/16-24 threaded barb fitting is currently only available with a barb for 1/4″ I.D. tubing. Suggested tube ID is for polyurethane or vinyl tubing. Consult factory if you plan to use a different tubing material.