Description: Low profile miniature swivel fitting with 10-32 thread and built-in barb. Designed to swivel freely 360 degrees in applications with low cycling.
Max Pressure Rating: 100 psig, when used with appropriately sized polyurethane tubing. With a clamp installed, the limiting factor generally becomes the burst pressure of the tubing.
Max RPM: This fitting is not designed for applications involving continuous rotation, and is not recommended for over 5 rpm. Please consult factory if your application is over 5 rpm.
Materials: 303 Stainless Steel stud. Brass body.
- Beswick’s trademark O-ring seal design provides a leak-tight joint.
- Beswick’s proprietary single edged “line contact” barb allows tubing to be pushed onto the fitting easily by hand, while still providing exceptional holding power. It also insures a leak tight connection at the tubing interface.
Note: Suggested tube ID is for polyurethane or vinyl tubing. Consult factory if you plan to use a different tubing material.