Whether we are creating custom designed fittings, valves or regulators for a customer or continuing our long history of innovation, there are always new products for us to share with you.
Check out the newest in fluid power design solutions.
Prevent a major leak failure, and all the associated problems caused by leaks, by installing the Beswick EFV valve into your compressed air, gas or liquid systems. The EFV acts as a “circuit breaker” for fluid flow. If flow exceeds the set limit, the EFV1 will trip, shutting off the flow. The valve has an […]
Pinch valves are used to control fluid when it is advantageous to avoid fluid contact with mechanical components and elastomeric seals, where other designs such as ball valves and poppet style valves have direct fluid contact. Pinch valves achieve fluid control by clamping down on the outside diameter of the tubing to stop flow. The […]
Streamline your miniature fluid lines and prevent leakage during connection and disconnection with the Beswick QDM34L series four-line, dry break quick disconnect. The dry break design minimizes dead volume (the space between the internal and external ends when connected) to essentially eliminate any leakage when making or breaking connections. Both the internal and external ends include […]
Beswick Engineering’s new NV3I needle valve has a new form factor featuring in-line M3 porting. The new configuration allows for simplified tubing connections and higher pressure rating while maintaining a compact layout . The new design is rated for inlet pressures up to 1,000 psi (68 bar). The fine threaded adjustment provides 4 turns from […]
Prevent contaminants from flowing through pneumatic lines with these new 10-32 or M5 threaded, adjustable position filter elbow fittings. A porous sintered filter (5 micron, 20 micron, 40 micron) or wire mesh screen (43 micron) is pressed into the threaded end of the stud. The body includes a barb for use with soft tubing IDs ranging […]
The QD3NL series non-latching blind-mate quick disconnect is ideal for use in cooling systems (such as are common in process, semiconductor, instrumentation, and aerospace industries) for quick serviceability. Disconnection and connection is accomplished without the need to manually move a releasing sleeve and therefore the quick disconnect can be positioned in inaccessible locations. The dry-break […]
Beswick Engineering’s Rapid Pressurization Valve (RPV) is a novel product designed to control the motion of a pneumatic actuator such as a chuck, press, or gripper as it contacts a work-piece. The device is purely mechanical and therefore does not draw electric power to function. Simply install the RPV in-line with your actuator, set the […]
New from Beswick Engineering: 37 degree flare fittings for use with 1/8” OD and ¼” OD metallic tubing. These Beswick MFM series flare fittings are available with 10-32 UNF, ¼-28 UNF, and 5/16-24 UNF thread sizes. The threaded end of the flare fitting includes the innovative Beswick captured o-ring face seal gland which insures a leak-tight […]
We have recently released a new compression fitting line for use with 1/32″ O.D. tubing. They are initially available in straight configuration with a 10-32 threaded connection. Assemblies are leak free due to the internal ferrules and our signature captured O-ring face seal design. Find out more in our online catalog by clicking bellow: Standard […]
Introducing the Beswick Engineering miniature high purity stainless steel relief valve designed for applications requiring a safety device to prevent over pressurization of a system. This design saves a considerable amount of space as the valve is just over a 1” (2.6 cm) in height and contains the popular 10-32 thread with an integrated O-ring […]