You are here

Home » 

Product News

Subscribe to our Beswick news RSS feed 

Learn About Our New Rapid Pressurization Valve

Beswick Engineering’s Rapid Pressurization Valve (RPV) is a novel product designed to control the motion of a pneumatic actuator such as a chuck, press, or gripper as it contacts a work-piece. The device is purely mechanical and therefore does not draw electric power to function. Simply install the RPV in-line with your actuator, set the operating pressure and flow restriction, and let it control the movement of the actuator. The RPV functions as a hybrid between a safety device and a flow controller.

Stainless Steel Flare Fittings Now Available

New from Beswick Engineering:  37 degree flare fittings for use with 1/8” OD  and ¼” OD metallic tubing. These Beswick MFM series flare fittings are available with 10-32 UNF, ¼-28 UNF, and 5/16-24 UNF thread sizes. The threaded end of the flare fitting includes the innovative Beswick captured o-ring face seal gland which insures a leak-tight connection between the flare fitting and the mating component. The MFM series 37 degree flare fittings can be used with stainless steel, copper, and aluminum tubing.

Our Smallest Relief Valve Is Now Available!

Introducing the Beswick Engineering miniature high purity stainless steel relief valve designed for applications requiring a safety device to prevent over pressurization of a system. This design saves a considerable amount of space as the valve is just over a 1” (2.6 cm) in height and contains the popular 10-32 thread with an integrated O-ring face seal for leak-tightness. Although miniature in size it is high on performance and maintains an accurate set pressure.

You can take a look at all of the additional options available for the RV-MLS on our website here:

New Connection Options For High Flow Dry Break Quick Disconnect

Beswick's line of high flow dry break quick disconnects just got more connection options.  Previously only available with an M8 thread, other options such as 1/4" compression fittings and 5/16-24 threads are now in stock.  The QD3L series of quick disconnect offers spill-free connection and disconnection while providing a high rate of flow in a small overall package.  You can find the new products here on our website:

External Pin

New 1/32 Compression Fitting Sizes Released

We have recently released a new compression fitting line for use with 1/32" O.D. tubing.  They are initially available in straight configuration with a 10-32 threaded connection.  Assemblies are leak free due to the internal ferrules and our signature captured O-ring face seal design. Find out more in our online catalog by clicking bellow:

New MBV4P-1414-3 Selector Valve

MBV4P-1414-3 Selector Valve


New "Pressure Regulators - Design Selection is Key" White Paper


Beswick Engineering has released its latest white paper on "Pressure Regulators - Design Selection is Key". Learn about specific design selection parameters including operating pressures, flow requirements, temperature compatibility, and more.

New MCB-4MM Compression Fitting Now Available

We have recently released our compression fitting for use with 4mm O.D. tubing, which includes a 10-32 threaded connection.  Assemblies are leak free due to the internal ferrules and our signature captured O-ring face seal design. Find out more in our online catalog by clicking below!

New QDM3I-3 and QDM3E-3 Dry Break

Beswick Engineering introduces a new dry break series in its quick disconnect product line. The dry break quick disconnect functions similar to a double shut-off quick disconnect however it provides a higher level of sealing during connection and disconnection. The dry break connects without leakage or fluid spray.

New "The Basics of a Pressure Relief Valve" White Paper